Air Cleaner Clearing And Fitting; Fuel Sensor Filter Clearing And Changing; Check Of The Leakage - Serpento PREDATOR Manual De Usuario

Avoid sundries into cylinder after remove spark plug.

Air cleaner clearing and fitting

The function of air cleaner is to put cleared air into carburetor, and mixed with petrol to make burning mixed gas.
After 1000km riding, clear air cleaner at least one time. Check carefully and clean air cleaner filter after 4000km riding.
Shorten the time of clear and period of changing air cleaner if you use the motorcycle in the much dust area. Keep air cleaner clean can improve
the power of engine and prolong the engine using time.
Disassembly the filter of the air cleaner,
1) Take out filter discreteness
2) Clear filter in water cleanser and dry it after clear
3) Penetrate filter into 15W/40-SG petrol engine oil until saturation and edge out until tiny moist.
4) Clear dust and sundries of air cleaner outside and dry it.
5) Put all part into right order and joint air cleaner.
Warming: petrol and high burning point impregnate is easy to burn, they can not be used to clear filter. Do not start engine without filter.
Do not make water into filter when washing car or it may effect performance of engine.

Fuel sensor filter clearing and changing

Fuel sensor filter is under the fuel tank. Change and clear timely, air dry it from inside to outside after clearing. Change it if any damage find.

Check of the leakage

The joint of the air way should be checked according to the regulation, especially for the joint of muffler and engine , and the joint of air cleaner,
• PREDATOR
MANUAL DEL USUARIO
31