Fuse Replacement; Kit; Fastening Of Screw And Bolt; Break Down Inspection And Repair - Serpento PREDATOR Manual De Usuario

FUSE REPLACEMENT

If the fuse is fuzzed, the ignition switch and other fault circuit switches. Replace it with the backup fuse inside the fuse casa. After that, switch
on and watch if all the electric devices work normally.
If you do not have fuse which's amperage is not the same as the original, please install it with smaller one.
If the fuse which has the same amperage with the original one is fuzzed again after you replace it, please remain the fuzzed one inside the fuse
case and contact with our maintenance station of your district for inspection.
WARNING
The ignition switch should be turn off before the inspection or replacement of fuse to avoid
the short-circuiting.

KIT

Some small maintenance, adjustment of the rear mirror and the replacement of the
accessories can be done with kits inside the kit case. The kits are as the following:
Handle bar of screwdriver; double head screwdriver;
spark plug socket wrench; split wrench 8×10; split wrench 12×14;

FASTENING OF SCREW AND BOLT

To confirm the safety of ride, before or after operation of the motorcycle, users should fasten the following screws and bolts: front and rear
absorber, fork axle, front and rear wheel axle, engine suspension, steering system, handle bar, front and rear brake, clutch, rack and other
screws and bolts of the whole vehicle.

BREAK DOWN INSPECTION AND REPAIR

NOTE: The design of the whole motorcycle is done by professional person. so if you have no professional knowledge and experience on
it, please do not dispatch it or maintain it by yourself. Meanwhile, before the break down inspection and repair, it is best to contact with the
distributors and your problems will be dealt with.
If the engine cannot be started, please check if the fuel inside the tank is enough or not .If there is enough fuel in it, please check the ignition
system.
• PREDATOR
MANUAL DEL USUARIO
39