Descargar Imprimir esta página

Power Supply; Mains Supply; Battery Supply; Bontempi Optional Accessories - Bontempi MUSIC METHOD SYSTEM 5 B 409 Libro De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

INTRODUCTION

MAINS SUPPLY

The instrument can be supplied by the AC/DC "ADS 0904"
(Vdc =9V / I = 400 mA)
ter (not supplied) conforms to national and international
safety regulations covering electrical appliances.
• The toy is not intended for children under 3 years old.
• The toy must only be used with the recommended adaptor
• The toy is to be disconnected from the adaptor before cleaning
• The mains adaptor is NOT a toy.
RECOMMENDATIONS: The socket (1) for the adapter plug
must be easily accessible. Inserting the plug into the socket
at the back of the instrument automatically cuts off supply
from the batteries. Ensure that the adapter is sufficiently
ventilated and that the ventilation slits are not covered with
objects such as newpapers, tablecloths, curtains, etc. Do not
expose the adapter to drops or splashes of water.
WARNING: All batteries or transformers with safety insula-
tion must be checked regularly for faults in cable, wire, or
plug insulation or other parts.

BATTERY SUPPLY

This instrument works with six 1.5V IEC R6 /AA batteries
(not supplied) which are inserted in the housing at the
bottom.
To open press on the part of the lid marked OPEN.
Fit the batteries as shown at the bottom of the housing.
ADVICE ON USING THE BATTERIES
• Non-rechargeable batteries are NOT to be recharged. •
Rechargeable batteries must be removed from the product
before being charged. • Rechargeable batteries are only to
be charged under adult supervision. • Different types of
4
POWE R SU PPLY
batteries or new and old batteries are not to be mixed. •
Use only batteries of the same or equivalent type. •
Batteries are to be inserted with correct polarity. • Remove
positive central adap-
exhausted batteries to prevent leakage. • Do not short cir-
cuit supply terminals. • Remove batteries during long
periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentio-
ned here below, please refer to Council Administration
office regarding specialised waste collection centres.
1
1 - DISPOSAL OF BATTERIES
Protect the environment by disposing
of batteries in the special containers
provided for this use.
2 - PACKAGING DISPOSAL
Take the paper, cardboard and corrugated board to the
appropriate waste collection centres. Plastic material must
be placed in the relevant collection containers.
The symbols indicating the various types of plastic are:
Key for the different types of plastic materials:
PET= Polyethylene terephtalate
PE= Polyethylene, code 02 for PE-HD, 04 for PE-LD
PVC =Polyvinyl chloride
PP= Polypropylene
PS= Polystyrene, Polystyrene foam
O= Other polymers (ABS, Laminates, etc.)
3 - WASTE DISPOSAL OF USED ELECTRICAL AND
ELECTRONIC APPLIANCES
All articles displaying this symbol on the body,
packaging or instruction manual of same, must
not be thrown away into normal disposal bins
but brought to specialised waste disposal cen-
tres.
Here, the various materials will be divided by characteristi-
cs and recycled, thus making an important contribution to
environmental protection.

BONTEMPI OPTIONAL ACCESSORIES

ADS 0904
Mains supply adaptor.
Vdc = 9V; I = 400 mA
01
02
03
05
PET
PE
PVC
PP
06
07
PS
O
[1]
[2]
[2]
[3
[4]
[5]
[6]
[7]
[8]
[9]

Publicidad

loading

Este manual también es adecuado para:

Music method system 5 b 499