Cable Control Buttons - Pioneer PDP-5050HD Manual De Instrucciones

Useful Remote Control Features
1
2
3

Cable control buttons

When the Mode switch is set to CBL/SAT, the cable converter
connected to the display can be operated using 1 to 5.
Mode switch
Cable converters made by other manufacturers and not preset
(with "CBL/SAT"
can also be operated using the remote control unit if 1 to 5
selected)
have learned the functions. See page 62.
1 0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch.
2 CH +/–
Press CH + or CH – to tune in a higher or lower channel.
4
3 SOURCE
Turns the cable converter power on and off.
5
4 CH ENTER *
Fix the selected channel with the direct channel selection
buttons.
5 CH RETURN *
Press to switch between the current channel and the
channel you were watching immediately before.
* Some manufacturers do not preset CH ENTER and
CH RETURN. Use these buttons to learn if necessary.
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can learn the
control signal from another device's remote control.
13
65
En