Selecting A Screen Size - Pioneer PDP-5050HD Manual De Instrucciones

10 Adjustments and Settings
AV mode
WIDE
CINEMA
PC mode except for XGA signals
Dot by
Dot
PC mode for XGA signals
FULL2
46
En
4:3
FULL
ZOOM
4:3
FULL
4:3
FULL1

Selecting a screen size

In single-screen mode, press SCREEN SIZE to change the size
of the screen from among the selectable options for the type of
video signals currently received.
• The selectable screen sizes differ depending on the types of
input signals.
AV mode
Item Description
4:3 For 4:3 "standard" pictures. A side bar appears on
each side.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on the
top and bottom with some programs.
CINEMA For 14:9 letterbox pictures. Bars may appear on the
top and bottom on some programs.
WIDE In this mode pictures are progressively stretched
toward each side of the screen.
PC mode except for XGA signals
Item Description
4:3 Fills the screen without altering the input signal
aspect ratio.
FULL Full 16:9 screen display
Dot by Dot Matches input signal with same number of screen
pixels.
PC mode for XGA signals
(Ex. 1024 × 768 input at PDP-5045HD)
Item Description
4:3 Matches input signal with the same number of
screen pixels.
Optimized for 1024 × 768 display
FULL1 Full 16:9 screen display
Optimized for 1024 × 768 display
FULL2 For wide signal display
Use when displaying 1280 × 768 signal resolution.
• In 2-screen mode, press SCREEN SIZE to change the size of left
screen.
• The PC mode above is for the PDP-5045HD. For the PDP-4345HD the
number of panel pixels is different, so signal processing and actual
viewing conditions will vary slightly.
• While watching High Definition TV broadcasting, pressing SCREEN
SIZE switches between FULL and WIDE.
• If you watch High Definition TV broadcasting with WIDE selected,
part of the screen (e.g., images, graphic interface) can be missed. If
this is the case, select FULL.