Adjusting Image Positions And Clock Automatically (Pc Mode Only); Adjusting Image Positions And Clock Manually (Pc Mode Only) - Pioneer PDP-5050HD Manual De Instrucciones

Adjustments and Settings
Adjusting image positions and clock
automatically (PC mode only)
Use Auto Setup to automatically adjust positions and clock of
images coming from a personal computer.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Auto Setup". ( /
Option
Auto Setup
Manual Setup
• Auto Setup starts.
4
Press HOME MENU to exit the menu.
• When Auto Setup is finished, "Auto Setup completed." appears.
• Even when "Auto Setup completed." appears, Auto Setup may have
failed, depending on conditions.
• Auto Setup may fail with a PC image composed of similar patterns or
monochrome. If not successful, change the PC image and try again.
• Be sure to connect the computer to the Media Receiver and switch it
on before starting Auto Setup.
Adjusting image positions and clock
manually (PC mode only)
Usually you can easily adjust the positions and clock of images
using Auto Setup. Use Manual Setup to optimize the positions
and clock of images when necessary.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Manual Setup". ( /
4
Select an item to be adjusted. ( /
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
then ENTER)
then ENTER)
then ENTER)
0
0
5
Perform adjustment. ( /
• Use / only when you adjust the vertical position
after selecting "H/V Position Adjust".
6
Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press
"Reset" in step 4, and then press ENTER. A confirmation screen
appears. Press / to select "Yes", and then press ENTER.
and / )
/ to select
10
45
En