Enjoying A Game Console Or Watching Camcorder Images; Connecting A Game Console Or Camcorder; Displaying An Image Of The Game Console Or Camcorder; Recording Digital Tv Programs Using A Vcr Or Dvd Recorder - Pioneer PDP-5050HD Manual De Instrucciones

12 Enjoying through External Equipment
Item Description
Auto Automatically identifies input audio
(factory default) signals.
Digital Accepts digital audio signals.
Analog Accepts analog audio signals.
6
Press HOME MENU to exit the menu.
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need to
connect analog audio cables.
Enjoying a game console or watching
camcorder images

Connecting a game console or camcorder

Use the INPUT 4 terminals to connect a game console,
camcorder and other audiovisual equipment.
Media Receiver (front view)
COMPONENT VIDEO
Y C / P C / P
B B R R
S-Video cable
(commercially available)
Component Video cable
(commercially available)
Game console/Camcorder
52
En
INPUT 4 PC
AUDIO
S-VIDEO VIDEO AUDIO ANALOG RGB
(STEREO)
L R
AV cable
(commercially available)
• The INPUT 4 terminals are checked for cable connections in the
order where; 1) Component Video, 2) S-Video, 3) Video.
• Connect external equipment to only terminals that are to be actually
used.
Displaying an image of the game console or
camcorder
To watch an image coming from the game console or
camcorder, press INPUT 4 on the remote control unit or press
INPUT on the Plasma Display to select INPUT4.
Recording digital TV programs using a
VCR or DVD recorder
If you connect recording equipment such as a VCR or DVD
recorder to the MONITOR OUT terminals on the rear of the
Media Receiver, you can record, for example, digital TV
programs using the recording equipment.
You can also record digital TV programs more easily by using
the supplied VCR controller. Connect the VCR controller to the
VCR control terminal on the rear of the Media Receiver and
then position the controller so that its light emitting section
faces the remote control sensor on the recording equipment.
For more information, see page 59.

Avoiding unwanted feedback

You can prevent unwanted feedback from adversely affecting
the quality of images. Specify the output terminal whose output
is to be inhibited.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Monitor Out". ( /
4
Select "INPUT1 Prohibit", "INPUT2 Prohibit", "INPUT3
Prohibit", or "INPUT4 Prohibit". ( /
5
Press HOME MENU to exit the menu.
then ENTER)
then ENTER)