Clock Setting - Pioneer PDP-5060HD Manual De Instrucciones

Tuner Setup
The following table shows the parameters selectable for each
item.
Item Selection
Font Size Auto/ Large/ Standard/ Small
Auto/ Font 1/ Font 2/ Font 3/ Font 4/ Font 5/ Font 6/
1
Font
Font 7
Font Color Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Magenta/ Cyan
Font Opacity Auto/ Solid/ Transparent/ Translucent/Flashing
Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/
Background
Magenta/ Cyan
Color
Auto/ Solid/ Transparent/ Translucent
Background
Opacity
1
Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with serifs)/
Font 3 (monospaced without serifs)/ Font 4 (proportionally spaced without ser-
ifs)/ Font 5 (casual font)/ Font 6 (cursive font)/ Font 7 (small capitals font)
With "Auto" selected, parameters specified by the provider are
used; if not specified by the provider, the bolded default
parameters are used. If you select parameters other than
"Auto", the selected parameters are used regardless of the
provider's specifications.

Clock Setting

With "Auto Set" selected for Clock Setting, the system acquires
and sets time information automatically. You can also
manually set the correct time. If you disconnect the power cord
from the power outlet or power blackout occurs, the set time is
cleared.
1
Press HOME MENU.
2
Select "Tuner Setup". ( /
3
Select "Clock". ( / then ENTER)
4
Select "Time Zone". ( /
5
Select a time zone for your area. ( /
Clock Time Zone
Atlantic
Time Zone
Eastern
Central
Mountain
6
Select "D.S.T.". ( , / , then ENTER)
7
Select "Applies" or "Does Not Apply". ( /
• Make this selection, depending on whether summer
time is employed in your area.
Clock Daylight Savings Time
D.S.T.
Applies
Does Not Apply
8
Select "Auto/Manual Set". ( ,
9
Select "Auto Set" or "Manual Set". ( /
then ENTER)
then ENTER)
then ENTER)
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:55 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu
Exit
then ENTER)
Current Time:
xxxxxxxxxxxxxxxxxxxxx
9:56 pm EDT
xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu
Exit
/ , then ENTER)
then ENTER)
10
If you select "Auto Set", select an antenna (A or B) and a
channel number using
Clock Auto/Manual Set Clock Set Channel
Auto/Manual Set •Auto Set Ant. A
• The date and time will be automatically corrected using
data from the selected channel.
If you select "Manual Set", manually set the date and time
using / , / and ENTER.
Clock Auto/Manual Set Date and Time
Auto/Manual Set •Manual Set
11
Press HOME MENU to exit the menu.
NOTE
• If you setup the TV Guide On Screen™ system, the Plasma
Display System acquires clock information through the TV
Guide On Screen™ system; in this situation you cannot set
up the clock using the menu. If you select a parameter for the
Clock menu and press ENTER, the menu screen disappears
and a dialog box appears instead; press A to clear the dialog
box.
/ and ENTER.
Current Time:
xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
2.0 xxxxxxxxxxxxxxxxxxxxx
Monday
xxxxxxxxxxxxxxxxxxxxx
05/17/04
Home Menu Exit
3
Current Time:
4 xxxxxxxxxxxxxxxxxxxxx
11:58 pm PDT
3 /17/04 11:58pm xxxxxxxxxxxxxxxxxxxxx
Monday
5 xxxxxxxxxxxxxxxxxxxxx
05/17/04
6
Home Menu
Exit
09
45
En