Adjustments And Settings Sleep Timer; Av Selection - Pioneer PDP-5060HD Manual De Instrucciones

Adjustments and Settings
11
Adjustments and Settings
Sleep Timer
When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.
Press SLEEP to select the desired time.
• The timer starts counting.
• Each time you press SLEEP, the selection is switched as
below:
30
(cancel) Off
• The factory default is "Off".
NOTE
• To cancel the Sleep Timer, select "Off" by pressing SLEEP.
• Five minutes before the selected time elapses, the remaining
time appears every minute.
You can also use the menu to set the Sleep Timer.
1
Press HOME MENU.
2
Select "Sleep Timer". ( /
3
Select the desired time. ( /
4
Press HOME MENU to exit the menu.

AV Selection

Select from the five viewing options, depending on the current
environment (e.g., room brightness), the type of the current TV
program, or the type of images input from external equipment.
1
Press AV SELECTION.
• The current AV Selection mode appears.
2
Press AV SELECTION again before the displayed mode
disappears.
• For AV source, the mode is switched in this order;
STANDARD, DYNAMIC, MOVIE, GAME, then USER.
• For PC source, the mode is switched between
STANDARD and USER.
58
En
60 90
(minutes)
120
then ENTER)
then ENTER)
You can also use the menu to change the options.
1
Press HOME MENU.
2
Select "Picture". ( / then ENTER)
3
Select "AV Selection". ( /
4
Select the desired option. ( /
AV Selection
STANDARD
DYNAMIC
MOVIE
GAME
USER
For AV source
Item Description
STANDARD For a highly defined image in a normally bright
room
This selection is shared by the external input and
TV input sources.
DYNAMIC For a very sharp image with maximum contrast
This mode does not allow manual image quality
adjustment.
This selection is shared by the external input and
TV input sources.
For movies
MOVIE
This selection is shared by the external input and
TV input sources.
Lowers image brightness for easier viewing.
GAME
This selection is shared by the external input and
TV input sources.
Allows you to customize settings as desired. You
USER
can set the mode for each input source.
For PC source
Item Description
For a highly defined image in a normally bright room
STANDARD
(factory default)
Allows you to customize settings as desired. You can
USER
set the mode for each input source.
5
Press HOME MENU to exit the menu.
NOTE
• You can also press AV SELECTION on the remote control
unit to switch the viewing option.
• If you have selected "DYNAMIC", you cannot select
"Contrast", "Brightness", "Color", "Tint", "Sharpness", "Pro
Adjust" and "Reset"; these menu items are dimmed.
then ENTER)
then ENTER)