Watching A D-Vhs Image; What Is I.link; Which I.link Devices Are Connectable; What Can Be Recorded Through I.link - Pioneer PDP-5060HD Manual De Instrucciones

Enjoying through External Equipment
Switching the optical audio signal type
Set up for the DIGITAL AUDIO output terminal (OPTICAL),
depending on your AV receiver.
1
Press HOME MENU.
2
Select "Option". ( / then ENTER)
3
Select "Digital Audio Out". ( /
4
Select "Dolby Digital" or "PCM". ( /
Item Description
Always outputs in the PCM format regardless of the
PCM
types of signals.
(factory default)
Dolby Digital For Dolby Digital encoded signals, outputs in the
Dolby Digital format. For PCM encoded signals,
outputs in the PCM format.
5
Press HOME MENU to exit the menu.

Watching a D-VHS image

What is i.LINK?

i.LINK is a digital serial interface for handling digital video,
digital audio, and other data in two directions. i.LINK is Sony's
term for the IEEE 1394 data transport bus. Digital AV
equipment compatible with i.LINK can be connected using a
single i.LINK cable. The i.LINK interface allows this PDP
system to control one of up to two connected i.LINK-
compatible devices that the system can identify.

Which i.LINK devices are connectable?

For i.LINK devices, this system supports only D-VHS recorders
which deal with the MPEG-TS format. The i.LINK terminals on
this system cannot be connected with other equipment such
as DVD recorders, digital video cameras, personal computers,
and PC peripheral devices because of differences in the
specifications.

What can be recorded through i.LINK?

With D-VHS recorders connected to this system through
i.LINK, you can record only digital TV programs. You cannot
record conventional TV channels nor contents coming from
external input sources and personal computers.

Connecting D-VHS recorders

Use the i.LINK terminals when connecting D-VHS recorders.
then ENTER)
then ENTER)
NT B

When connecting a single D-VHS recorder

Media Receiver (rear view)
S400
G-LINK
(TS)
ANT/ OPTICAL
CABLE A IN
R-AUDIO-L DIGITAL OUT
INPUT 3
MONITOR
OUT
INPUT 2
N Y C / P C
B B R
R-AUDIO-L VIDEO S-VIDEO
SERVICE ONLY
COMPONENT
INPUT 1 VIDEO
(Attach to either connector)
i.LINK cable
(commercially available)
To use i.LINK, you need to
connect only an i.LINK cable;
you need not connect cables to
the video and audio terminals.
D-VHS recorder

When connecting two D-VHS recorders

You can connect two D-VHS recorders directly to the i.LINK
terminals on the rear of the Media Receiver.
i.LINK cables
Media Receiver
REC
ON STANDBY TIMER
PULL
OPEN
STANDBY/ON
Using i.LINK cables you can also connect up to two
D-VHS recorders in a daisy chain.
i.LINK cable
Media Receiver
REC
ON STANDBY TIMER
PULL
OPEN
STANDBY/ON
Cable CARD
SUB WOOFER
/ P
R
INPUT 1 INPUT 3 BLACK
SYSTEM CABL
HDMI
D-VHS recorder
D-VHS recorder
D-VHS recorder
D-VHS recorder
12
71
En