Connecting A Recorder; Connecting Other Audio Equipment; Connecting An Av Receiver - Pioneer PDP-5060HD Manual De Instrucciones

Enjoying through External Equipment
12

Connecting a recorder

Media Receiver (rear view)
MONITOR
INPUT 2
ANT B
I N OUT
IN
SERVICE ONLY
CONTROL
G-LINK cable (for
presetting digital TV
programs for recording)
NOTE
• About the MONITOR OUT terminals
The MONITOR OUT terminals cannot output the following
signals:
1 Video signals input from the COMPONENT VIDEO
terminal
2 Video signals from a personal computer
3 Digital video and audio signals from the HDMI terminals
• When watching images played back on a VCR connected to
the MONITOR OUT terminals, select an input source (e.g., TV
channel reception) on the recording equipment other than
external input sources. Selecting an external input source
may result in distorted images or noise.
• Make sure to place the VCR into the standby status when
presetting TV programs for recording with the TV Guide On
Screen™ system.
• If degraded picture quality is observed while viewing copy-
protected VOD movies connect the Media Receiver directly
to other TV sets. Do not connect through a VCR.
• Use only one wand on the G-LINK cable to control the
recorder.
70
En
S400
G-LINK
(TS)
OPTICAL
ANT/
CABLE A IN
DIGITAL OUT
R-AUDIO-L
SUB WOOFER
INPUT 3
OUT
Y C / P C / P
R-AUDIO-L VIDEO S-VIDEO B B R R
INPUT 1
COMPONENT
INPUT 1 VIDEO
HDMI
AV cable
(commercially available)
VCR

Connecting other audio equipment

The digital audio output terminal (optical) on this system can
output Dolby Digital signals. Using an optical digital cable,
connect an AV receiver to the digital audio output terminal
(optical) on the rear of the Media Receiver. This allows audio
such as digital TV broadcasting to be played in high quality.
If your AV receiver does not have a digital audio input terminal
Cable CARD
(optical), connect the MONITOR OUT terminals (AUDIO) on the
rear of the Media Receiver to the audio input terminals on the
AV receiver.
INPUT 3 BLACK
SYSTEM
NOTE
• When using the digital audio output terminal (optical), you
need to make settings depending on your AV receiver. For
more information, see the instruction manual that came
with the AV receiver.

Connecting an AV receiver

Media Receiver (rear view)
ANT B
I N OUT IN
CONTROL
Optical digital cable
(commercially available)
NOTE
• For details, refer to the operation manual for the audio
equipment to be connected.
• Audio signals synchronizing with currently displayed images
are always output to the MONITOR OUT terminals.
• The audio accompanying the images shown on the display
are always output to the SUBWOOFER OUTPUT terminal.
• When signals are input from the HDMI terminals, no digital
or analog signals are output from the DIGITAL OUT terminal.
S400
G-LINK
(TS)
ANT/ OPTICAL
CABLE A IN
R-AUDIO-L DIGITAL OUT
INPUT 3
MONITOR
OUT
INPUT 2
Y C / P C / P
B B R R
R-AUDIO-L VIDEO S-VIDEO
SERVICE ONLY
COMPONENT
INPUT 1 VIDEO
AV cable
(commercially available)
This connection is
not required when
connecting an AV
amp equipped
with the surround
function to a
subwoofer.
AV receiver
Cable CARD
SUB WOOFER
INPUT 1 INPUT 3 BLACK WH
SYSTEM CABLE
HDMI
Subwoofer