Water Drain Connection; Connecting The Burnt Gas Exhaust Vent - Angelo Po BX61GW Manual De Uso

WATER DRAIN CONNECTION

To carry out this operation, proceed as follows.
1) Connect the mains water pipe (A) to the appliance's connection pipe (C).
2) Connect the vent pipe (D) to the appliance connection pipe (C) and fi x it to the support (E).
The appliance's drain line is fi tted with the plug (B)
allowing discharge of the waste deposited.

CONNECTING THE BURNT GAS EXHAUST VENT

Important
Make the connection in compliance with the relevant legal requirements, using appropri-
ate and recommended materials.
Important
The maximum exhaust gas temperature at the
outlet is about 400 °C.
Connecting to a fan extractor hood
Position the appliance underneath the hood (C) as
shown in the diagram.
Important
The gas supply tap must open automatically when
the fan of the extraction system is switched on.
3378750_GB_inst
C
A
- 11 -
D
C
B
C
min
0,3m
E
Ø17
ENGLISH
GB