Angelo Po BX61GW Manual De Uso página 38

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

– The button modifi es the preset standard regenera-
tion programs.
Press the key to show the program of choice on the
display (11).
Press the button (2) to start the program selected.
Once the program has been started only, buttons
(6-7- 8-9) and knob (10) can be used to modify the
values set for the current stage.
During cooking, buttons (3-4-5) can be used to
modify the cooking mode.
Note: Changes made in this way only remain ac-
tive for the current cooking process; to save them
permanently, press the button of the cooking
mode (3-4-5) being used for at least 3 seconds.
Important
To return to the original settings, with the
appliance in the STOP phase (green light of button
(2) on),press the button (14) and hold it down for
longer than 3 seconds (the whole panel powers
down) then press the button (15) until PrG ok
appears.
15) Fun speed button
With the appliance in START phase only (after cooking
starts) press the button to set the fan at intermittent
speed:
– Button (15) off : maximum speed.
– Button (15) lit and display (13) with rotating
dot: intermittent speed.
16) Washing program button / Quick cooling button:
To carry out this operation, proceed as follows.
In STOP status press button (16):
– once and the display (13) will show the message P01.
– twice and the display (13) will show the message P02.
– 3 times and the display (13) will show the message P03.
– 4 times and the display (13) will show the message P04.
GB
– 5 times and the display (13) will show the message dEC.
– 6 times and the display (13) will show the message SA.
– 7 times and the display (13) will show the message tcl.
– 8 times and the display (13) will show the message SPl
– 9 times and the display (12) will show the message CLd ("Quick cooling").
With the "quick cooling enabled" function:
– for cooling the cooking chamber quickly with the door closed.
Press the button and the display (11) will show the message "100°C" and the display (12) the
message "CLd". Press the button (6) and turn the knob (10) to set the cooling temperature re-
quired. Press the key (2) to start the program. At the end of the cycle the appliance shuts down
and a buzzer sounds.
– For enable / disable the function of cooldown during cooking.
With the appliance in the STOP phase (green light of button (2) on),press the button (14) and
hold it down for longer than 3 seconds (the whole panel powers down). Keep button (16)
pressed and turn the knob (10) for selecting the "cooldown ON/OFF" mode. Press button (16)
to save the selected function.
Important
Do not use this function while cooking is in progress.
17) The "delay start" button: is used to start delayed cooking.
Press the (17) button and the display (12) will show the max. delay start time (1 hour).
Press the (7) button and turn the knob (10) to set the desired value.
3378750_ut_GB
3 4 5
19
1
11
6
REAL
7
8
INJ
14
15
10
- 10 -
2
12
9
13
17
16
18
ENGLISH

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Bx61gwrBx101gwBx101gwrBx82gwBx122gw

Tabla de contenido