Description Of Controls - Angelo Po BX61GW Manual De Uso

DESCRIPTION OF CONTROLS

1) On-off button: for switching the appliance' on and off .
2) START-STOP button: Starts or ends the selected program cycle, shown on the display (coo-
king cycle, washing cycle, etc.).
Green light on (steady light): cooking program in pause status or ready to start.
Press the button to start the cooking program.
Green light on (fl ashing): cooking program in progress.
Green light off : appliance off .
3) Convection cooking button: for selecting convection (fan-assisted hot air) cooking mode.
Green light on: convection cooking mode selected.
4) Mixed cooking button: for selecting mixed cooking mode (convection + steam).
Green light on: mixed cooking mode selected.
5) Steam cooking mode button: for selecting steam
cooking mode.
Green light on: steam cooking mode selected
6) Temperature setting button
– To set the cooking temperature: press once (the
green light fl ashes) to set the temperature using
the knob (10).
– To modify the temperature during cooking: press
once to display the value of the temperature set on
the display (11). Press the button and turn the knob
(10) to modify the value set.
– Changes the temperature unit of measurement
from degrees Centigrade (°C) to degrees Fahren-
heit (°F).
With the appliance in the STOP phase (green light
(2) on) press the button and hold it down for longer
than 3 seconds (the whole panel powers down).
Press and hold the button (6) and turn the knob
(10) to select temperature display in ° C or ° F. Press
the knob (10) to confi rm the changes made.
7) Time setting button (Timer)
– To set the cooking time: press once (the green light
fl ashes) to set the cooking time using the knob (10).
Keep the button pressed for about 2 seconds to set
an "unlimited" cooking time; the display (12) shows
the message "InF", which cannot be modifi ed.
– To modify the time during cooking: press once to di-
splay the value of the time set on the display (12).
Press the button and turn the knob (10) to modify
the value set.
– Enable or disable the automatic preheating. With
the appliance in the STOP phase (green light (2) on)
press the button and hold it down for longer than 3
seconds (the whole panel powers down). Press and
hold the button (7) and turn the knob (10) to en-
able or disable the automatic preheating. Press the
button (7) to confi rm the changes made.
8) Humidity percentage setting button
– Sets the humidity percentage in mixed cooking
mode (convection + steam). Press button once (the
green light fl ashes) and set the percentage of humi-
dity using the knob (10).
– To modify the percentage of humidity during coo-
king: press once to display the value of the humidity
on the display (13).
Press the button and turn the knob (10) to modify
the value set. Wait about 5 seconds for the new
value set to be saved.
3378750_ut_GB
3 4 5
19
1
11
6
REAL
7
8
INJ
14
15
10
18
- 7 -
2
12
9
13
17
16
GB
ENGLISH