Troubleshooting - GreenWorks Tools 2402707 Manual De Utilización

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
English (original instructions)
PROBLEM POSSIBLE CAUSE
1. Bag full
2. Blocked tube
3. Blocked impeller
Unit will not blow
4. Dirty bag
or mulcher.
5. Torn bag
6. Bag unzipped
7. Unit unplugged
1. Unit is unplugged.
2. Power/speed switch is in
the OFF position.
3.Defective power switch.
Unit will not start.
4. Vac tubes are not
correctly installed.
5. Intake gate/cover is not
closed.

TROUBLESHOOTING

SOLUTION
1. Empty the bag.
2. Clear the blockage.
3. Clear the blockage.
4. Clean the bag.
5. Replace the bag.
6. Zip up the bag.
7. Plug into an outlet or an extension cord.
1. Check cord to make sure it is plugged into an electrical
outlet.
2. Press the on/off switch.
3. Call toll free helpline.
4. Check vac tubes to ensure that they are allowing the
switch to be engaged when correctly installed.
5. Ensure that gate/cover is fully closed and locked.
4