Electromagnetic Compatibility - Riester ri-scope L Instrucciones Para El Uso

21.ELECTROMAGNETIC COMPATIBILITY

ACCOMPANYING DOCUMENTS ACCORDING TO IEC 60601-1-2, 2014, Ed.4.0
CAUTION!
Medical electrical equipment is subject to special precautions in terms of elec-
tromagnetic compatibility (EMC).
Portable and mobile radio frequency communication devices may affect medical
electrical equipment. The ME device is intended for operation in a home health
care electromagnetic environment and for professional facilities such as indus-
trial areas and hospitals.
The user of the device should ensure that it is operated within such an en-
vironment.
Warning:
The ME device may not be stacked, arranged or used directly next to or with
other devices. When use close to or stacked with other devices is required, the
ME device and the other ME devices must be monitored to ensure intended
operation within this configuration. This ME device is intended for use by me-
dical professionals only. This device may cause radio frequency interference or
interfere with the operation of nearby devices. It may become necessary to take
appropriate corrective measures, such as redirecting or rearranging the ME
device or shield.
The ME device assessed does not exhibit any essential performance characte-
ristics in the sense of EN60601-1, which would present an unacceptable risk to
patients, operators or third parties should the power supply fail or malfunction.
Warning:
Portable RF communications equipment (radios) including accessories, such
asantenna cables and external antennas, should not be used in closer proximity
than 30 cm (12 inches) to parts and cables of the ri-scope L instrument head
specified by the manufacturer. Failure to comply may result in a reduction of the
device's performance characteristics.
Guidelines and manufacturer's declaration - electromagnetic emissions
The ri-scope® L instruments are intended for use in the electromagnetic
environment specified below. The customer or user of the ri-scope® L
should ensure that it is used in such an environment.
Emissions test
RF emissions
RF emissions
pursuant to
CISPR 11
RF emissions
RF emissions
according to
CISPR 11
Harmonic
emissions
IEC 61000-3-2
Emissions of
voltage fluctua-
tions, flicker
IEC 61000-3-3
62
Compliance
Group 1
Class B
Not applicable
Not applicable
Electromagnetic
environment - guidance
The ri-scope® L uses RF energy
exclusively for internal functions.
Therefore, its RF emissions are
very low and unlikely to disturb
nearby electronic devices.
The ri-scope® L is intended for
use in all establishments, including
residential areas and those directly
connected to a public supply net-
work that also supplies buildings
used for residential purposes.