Inserting The Batteries; Removing The Rechargeable Batteries: - Riester ri-scope L Instrucciones Para El Uso

3. Operation (inserting and removing batteries and rechargeable batteries)
CAUTION!
Use only the combinations described under 2.3 to 2.8!

3.1. Inserting the batteries:

Battery handles (2.3 and 2.7) type C and AA with rheotronic® 2.5 V:
- Unscrew the battery handle cover on the lower part of the handle in an anti-
clockwise direction.
- Insert the standard alkaline batteries designated for this battery handle with
the plus side in the direction of the handle top into the battery handle.
- Firmly screw the battery handle cover back on.
3.2. Removing the batteries:
Battery handles (2.3 and 2.7) type C and AA with rheotronic® 2.5 V:
- Unscrew the battery handle cover on the lower part of the battery handle in
an anticlockwise direction.
- Remove the batteries from the battery handle by holding the opening of the
battery handle slightly downwards and shaking it slightly if necessary.
- Firmly screw the battery handle cover back on.
CAUTION!
For all factory-installed or separately supplied batteries, the red safety foil on
the plus side must be removed before startup!
CAUTION!
Only applies to battery handle (2.5) type C with rheotronic® 3.5 V for charging
at a 230 V or 120 V socket:
When using the new ri-accu® L, art.no. 10692, ensure that the spring of the
battery handle cover is not insulated. When using the old ri-accu® L, art.no.
10692, the spring must be insulated (short circuit hazard!).
neuer ri-accu
3.3. Inserting the batteries:
Battery handles (2.4 and 2.8) type C and AA with rheotronic® 3.5 V (for ri-char-
ger® L).
Battery handle (2.6) type C with rheotronic® 3.5 V (for plug-in charger). Bat-
tery handle (2.5) type C with rheotronic® 3.5 V for charging at a 230 V or 120
V socket.
CAUTION!
Please observe the safety information!
- Unscrew the battery handle cover on the lower part of the handle in an anti-
clockwise direction.
- Remove the red safety foil on the plus side of the battery during initial startup.
- Insert the battery appropriate for your battery handle (see 2.2) into the battery
handle with the plus side pointing towards the top of the handle. In addition
to the plus symbol, you will also find an arrow that shows you the direction of
insertion into the battery handle.
- Firmly screw the battery handle cover back on.

3.4. Removing the rechargeable batteries:

Battery handles (2.4 and 2.8) type C and AA with rheotronic® 3.5 V (for ri-char-
ger® L).
Battery handle (2.6) type C with rheotronic® 3.5 V (for plug-in charger). Bat-
tery handle (2.5) type C with rheotronic® 3.5 V for charging at a 230 V or 120
V socket.
CAUTION!
Please observe the safety information!
- Unscrew the battery handle cover on the lower part of the battery handle in
an anticlockwise direction.
- Remove the batteries from the battery handle by holding the opening of the
battery handle slightly downwards and shaking it slightly if necessary.
- Firmly screw the battery handle cover back on.
48
L
®
alter ri-accu
®
L