Ingersoll Rand G330 Guía De Usuario Y Mantenimiento Manual página 85

Maintenance
Drive belts. Checking and adjusting
Inspection and adjustment should be carried out after
running the engine when the belts are warm.
Undo the screws (A) before tensioning the generator
belts. It should be possible to depress the belts 10
mm between the pulleys. Worn belts which work in
pairs should be replaced at the same time.
The fan belts have an automatic belt tensioner and do
not need adjusting. However, the condition of the belts
must be checked. Replace if required.
25