Starmix NSG uClean PA-1455 KFG Instrucciones Para El Manejo página 31

Switch on the vacuum cleaner:
1. Connect mains plug of the vacuum cleaner to plug socket.
9 The submersible pump performs a self-test and starts for approx. 3 seconds.
2. Slightly open the auxiliary air slide on the handle tube.
3. Set main switch to position I.
9 Vacuum cleaner is running.
4. Check and switch on the personal protection switch
switch").
5. Absorb water.
9 When a certain water level is reached in the container, the submersible pump starts to pump out the
absorbed water.
Switch off the vacuum cleaner:
1. Remove suction nozzle from the liquid.
9 Residual water in the suction hose is sucked into the container and cannot leak out.
2. Set main switch to position 0.
Sucking up liquids without submersible pump
r Submersible pump is removed (see "Removing the submersible pump").
r Foam filter FSS 1200 (blue) is inserted.
r There is no filter bag and no dirt in the container.
Required equipment
Foam filter FSS 1200 (blue)
Suction hose with hand tube
Water nozzle
Filter bag FSN 80 (option), for separation of dirt
particles > 80 µm
Filter bag FSN 1000 (option), for separation of
dirt particles > 1000 µm
Retaining ring for filter bag FSN 80
Wet filter bag NFB
Place the filter bag FSN 80 or FSN 1000 in the container (option):
1. Place filter bag on the edge of the container and thread it into the intake socket.
2. Fix retaining ring with bayonet lock on the intake socket.
9 Filter bag is fixed.
Set up and connect the vacuum cleaner:
DANGER!
Risk of electric shock and flooding due to overflow of the container (siphon principle)!
1. Always place the vacuum cleaner above the water level.
Depending on model
1)
(see "Checking and switching on personal protection
1)
Notes
Never vacuum without foam filter FSS 1200 (blue)
Do not install filter cartridge FPP 3600
For separating coarse dirt and liquid (pond cleaning, thread
algae), reusable, washable
For fixing the filter bag on the intake socket
For sludge extraction applications, for example during wet
drilling, wet grinding and wet cutting of stones, concrete or
masonry. For separation of sludge and liquid
en
31