Starmix NSG uClean PA-1455 KFG Instrucciones Para El Manejo página 32

en
1. Connect suction hose with hand tube and nozzle to the container.
Switch on the vacuum cleaner:
1. Connect mains plug of the vacuum cleaner to plug socket.
2. Slightly open auxiliary air slide on the handle tube.
3. Set main switch to position I.
9 Vacuum cleaner is running.
4. Check and switch on personal protection switch
switch").
5. Absorb water.
If there is a sudden loss of suction power and increased engine speed (changed motor noise), the float valve has
interrupted the suction process: The container is full.
1. Switch off the vacuum cleaner.
2. Empty container and filter cartridge.
Switch off the vacuum cleaner:
1. Remove suction nozzle from the liquid.
9 Residual water in the suction hose is sucked into the container and cannot leak out.
2. Set main switch to position 0.
Sucking up dry materials
r Submersible pump is removed (see "Removing the submersible pump").
r Filter cartridge FPP 3600 is inserted.
r Filter bag is inserted in the container.
Required equipment
Filter cartridge FPP 3600
Filter bag FBV 45/55
Suction hose with hand tube
Suction nozzle
Set up and connect the vacuum cleaner:
1. Connect suction hose with hand tube and nozzle to the container.
Switch on the vacuum cleaner:
1. Plug the mains plug into the socket.
2. Set main switch to position I.
9 Vacuum cleaner is running.
3. Check and switch on personal protection switch
switch").
4. To adjust the suction power, select from the following options (depending on equipment):
– Set switch to ECO position
– Set speed on the switch
– Set auxiliary air slide on the handle tube
32
(see "Checking and switching on personal protection
1)
Notes
Never vacuum without filter cartridge FPP 3600
Vacuum cleaner, filter and accessories need to be dry
When vacuuming dry dust: Insert a filter bag in the dirt
container so that the dust does not stick and or cake
Select accessories according to application area
(see "Checking and switching on personal protection
1)
Depending on model
1)