Ivoclar Vivadent bluephase C8 Manual Del Usuario página 168

bluephase
Operating Instructions
Bedienungsanleitung
Mode d'emploi
Istruzioni d'uso
Instrucciones de uso
Instruções de Uso
Bruksanvisning
Brugsanvisning
Käyttöohjeet
Bruksanvisning
Productinformatie
Oδηγίες Xρήσεως
Kullan›m K›lavuzu
For dental use only!
Caution: U.S. Federal law restricts this device to sale
by or on the order of a licensed dentist.
Made in Austria
Ivoclar Vivadent AG, FL-9494 Schaan / Liechtenstein
In USA distributed by
Ivoclar Vivadent Inc.,
175 Pineview Drive, Amherst,
NY 14228, USA
611504/0708/Rev1/WE3/H
meter
®
English
Operating Instructions
Dear Customer,
Thank you for having purchased the bluephase meter from Ivoclar
Vivadent. The light intensity of the polymerization light used is the
decisive factor when it comes to the sufficient curing of restorations.
In order to achieve adequate polymerization and thus durable high-
quality composite restorations, it is recommended to check the light
intensity of the polymerization lights regularly with a radiometer.
Intended use
The bluephase meter is a radiometer for measuring energy-rich blue
light in the wavelength range of 380-515 nm emitted by LED poly-
merization units for dental use. The intended use also includes the
observation of the notes and regulations in these Operating Instruc-
tions.
Indications
The bluephase meter is suitable for measuring the light intensity of
LED polymerization units for use in dentistry. In order to achieve
accurate measuring results, only light probes with a circular emission
window must be used.
Signs and symbols
Contraindication
Symbols on the curing light
Double insulation (Apparatus complies with safety class II)
Observe Operating Instructions
The apparatus must not be disposed in the normal domestic
waste.
Safety notes
The bluephase meter is a medical electronic device which is subject to
IEC 601-1 (EN 60601-1) and EMC standards. It complies with the
relevant EU regulations (see appendix).
The apparatus has been shipped from the manufacturer in a safe and
technically sound condition. In order to maintain this condition and to
ensure risk-free operation, the notes and regulations in these Operat-
ing Instructions have to be observed.