Suunto X6 Guia Del Usuario página 9

To replace the battery:
1. Insert a coin into the slot located on the battery
compartment cover on the backside of the Suunto
X6/X6M.
2. Turn the coin counterclockwise until it is aligned
with the open position marker, or even slightly
further for easy opening.
3. Remove the battery compartment cover. Ensure
that the O-ring and all surfaces are clean and
dry. Do not stretch the O-ring.
4. Remove the old battery carefully.
5. Place the new battery into the battery compart-
ment with the positive side facing up.
6. With the O-ring in the correct position, replace
the battery compartment cover and turn it with
the coin clockwise until it is aligned with the
close position marker.
NOTE: Battery replacement should be performed
with extreme care to ensure that the Suunto X6/
X6M continues to remain waterproof. Careless
battery replacement may void warranty.
NOTE: To reduce the risk of fire or burns, do not
crush, puncture or dispose of in fire or water.
Only replace with manufacturer-specified
batteries. Recycle or dispose of used batteries
properly.
NOTE: Place the
battery under the
contact clip.
Do not bend the clip.
Bending may cause
a malfunction.
7