Logbook - Suunto X6 Guia Del Usuario

3.5.2. Logbook

The logbook allows you to save information regarding, for example, a hiking trip.
When you start the logbook, it starts gathering information about the cumulative
ascents and descents, average ascent and descent rates, highest and lowest points
and specific marks you can set during the trip. When you stop the logbook, the
information gathered thus far is recorded as a logbook file that can be viewed later.
The maximum duration of one logbook is 168 hours (one week). After this the logbook
stops automatically. The Suunto X6/X6M can store 20 logbook files at one time. More
logbooks can be saved on your PC with the help of the PC Interface. For more
information, see page 52.
NOTE: To record a complete graph of the activity, use the stopwatch in the Chrono
mode.
Starting the logbook
To start the logbook:
1. Press Suunto in the main display.
2. In the Function menu, scroll to Logbook with the arrow buttons and press Suunto.
3. Scroll to Start and press Suunto.
If the logbook is not running and there is enough memory left, recording begins. The
message " " is displayed and you return to the Function menu.
LOGBOOK STARTED
If the logbook is already activated, the message " " is displayed
LOGBOOK ALREADY RUNNING
and you return to the Function menu, where the Stop field is displayed in reversed
color.
If there is not enough memory left, the message " " is displayed and the
MEMORY FULL
Suunto X6/X6M moves to a display that asks you to erase a logbook file.
35