Settings And Selection Of Ballistic Output; Formats; Equivalent Horizontal Range (Ehr) - Leica RANGEMASTER 2800.COM Manual De Instrucciones

SETTINGS AND SELECTION OF BALLISTIC
OUTPUT FORMATS
Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just set the
zeroing distance and
ABC
1. Press and hold the secondary button
• appears.
USEU
2. Press the secondary button briefly 4 times (<2 s).
• The display switches from
AbC.
3. By pressing the main button
desired ballistic setting is selected.
– or
EHr
– or
HOLd
– (1 MOA), (display in absolute values)
1
– (1⁄4 MOA), (display in clicks) or
1-4
– (1⁄3 MOA), (display in clicks) or
1-3
– mm or
10
– mm.
5
4. Save your setting by briefly pressing the
secondary button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display
disappears.
is still flashing in the display.
1
(≥3 s).
,
and to
bALL SId
bt bt
2
repeatedly, the
EQUIVALENT HORIZONTAL RANGE (
Shots at higher or lower elevation targets are subject
to changed ballistic conditions. They require knowledge
of the equivalent horizontal range, which is relevant for
hunting. Knowledge of the
e.g. ballistic reticles. values are indicated by the
EHr
additional display.
EHr
Note
Horizontal measurements may also result in values
EHr
that differ from the „straight line" measured range.
)
EHr
is important for using
EHr
EN
53