Setting The Unit Of Measure - Leica RANGEMASTER 2800.COM Manual De Instrucciones

SETTING THE UNIT OF MEASURE

The Leica Rangemaster can be set to metric or imperial
units of measure, i.e. for distance/temperature/
atmospheric pressure either meters/Celsius/millibar
or yards/Fahrenheit/InHg (Inches of Mercury). This
setting also determines the details of the holdover, the
ballistic curves and the zeroing distance.
1. Press and hold the secondary button
• appears (flashing) in the display.
USEU
2. Press the main button
unit of measure.
= display in yards
US
= display in meters
EU
Note
The current setting is always visible in the display:
(for meters) or (for yards) appears with the digits
Y
displayed.
1
(≥3 s).
2
to select your preferred
M
3. Save your setting by briefly pressing the
secondary button (<2 s).
• The saved setting is initially lit continuously as
confirmation, then the display switches to the
next item in the menu (ballistic curve bALL) and
then disappears if no further settings have
been made.
EN
43