Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - Hillrom The Twister Instrucciones De Uso

INSTRUCTIONS FOR USE
k. Adjust the level of lithotomy desired by loosening rotation knob on table
sockets while supporting weight of the leg. Securely lock the clamps.
l. Adjust the abduction, adduction, flexion, extension or level of lithotomy
carefully according to the requirements of the surgical procedures.

Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

Storage, Handling and Removal Instructions:

3.4.1 Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.

3.4.2 Removal Instruction:

a. Remove the Twister from the table using table sockets.
b. Adjust the height of the post to correspond with the patient's leg length and
Remove the Patient feet from Heel Cups.
c. Adjust the abduction, adduction, flexion, extension or level of lithotomy carefully
according to the requirements of the surgical procedures.

Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support user of
the device shall first contact Hill-Rom Technical Support.
Document Number: D-720016
Version: D
Page 16
Issue Date: 06 MAR 2020
Ref Blank Template: 80025117 Ver. F