Rules For Installation; Installation Examples - ABB 2CLA234009N234001 Instrucciones De Instalación, Uso Y Mantenimiento

ABB ABB
6.2

Rules for installation

IMPORTANT: the installation and electrical connection of the devices must
be carried out by qualified personnel and pursuant to current laws and
regulations. The manufacturer assumes no liability relating to the use
of products that are required to follow particular environmental and/or
installation standards, which are the competence of the installer and for
which the latter is responsible.
Installation of the chronothermostat: independent - fixed
•
recessed in a rectangular box of 3 modules.
•
install the chronothermostat approx. 1.5÷1.7 m from the ground, away from
sources of heat, windows and anything that might affect its normal operating
condition.
6.3

Installation examples

ATTENTION: before installing, turn off the power supply.
Heating equipment with chronothermostat that controls:
A)
wall-mounted boiler;
B)
burner or circulation pump or solenoid valve;
C) zone solenoid (example for floor equipment or other).
NOTE: the examples provided in the present documentation are just in
principle.
18 18 18 18
INSTALACIÓN
A B B B
C C
Chapter 6