Program Modification - ABB 2CLA234009N234001 Instrucciones De Instalación, Uso Y Mantenimiento

ABB ABB

11.4.4 Program modification

There are 4 available programs, all freely programmable for every time of day (in half
hour intervals) and differently for each day of the week, at 3 different temperature
levels: t1 comfort (top digits), t2 activity (middle digits), t3 economy (bottom digits),
plus a antifreeze temperature t1 for winter mode (digits not visible), or cooling
equipment off for summer mode.
1) To modify a program, from the INFO screen go to the required day and
move through the profile using buttons
is displayed, in 30-minute intervals (see previous section).
2) By pressing the SetT button one or more times, choose the new
temperature level you wish to assign to the required time: the modification
is made.
NOTE: The Set rotates from the adjusted t x, following the order t1,
t2, t3, t . The Set in question and reference digit flash, the word INFO
P0X (P01 in this case) will change to SET P0X (modification mode).
Returning to the original Set (level) will not produce any modification.
3) By pressing the buttons
the following (or previous) half hour and/or hours; modifying (or not) the
temperature level as shown in point 2.
50 50 50 50
until the time you wish to modify
it is possible to drag the selected new Set to
USER MENU
0 2 4 6 8 10 12 14 16 18
Set
0 2 4 6 8 10 12 14 16 18
20 22
OK
20 22
OK
Chapter 11