Modification Of The Measurement Unit For Reading The Temperature - ABB 2CLA234009N234001 Instrucciones De Instalación, Uso Y Mantenimiento

ABB ABB
12.6 Modification of the measurement unit for reading the
temperature
The factory setting is for the chronothermostat to display the temperature in degrees
centigrade (Celsius). It will be possible to switch to the Fahrenheit scale or back
applying the following procedure:
•
Following the path Menu -> CONFIG SEt -> select UNIT SEt, and next press
the OK button.
•
Use the 23 buttons to select the required measurement: °C or °F, and
then press the OK button to confirm.
All temperature settings will be updated according to the new scale.
•
Press the back button to exit.
62 62 62 62
CONFIGURATION MENU
Chapter 12