Vacation Program - ABB 2CLA234009N234001 Instrucciones De Instalación, Uso Y Mantenimiento

ABB ABB

11.2.3 Vacation program

This program is useful if you intend to leave the house for several days (suspension
of temperature control). Once the period adjusted with the VACATION program is
over, your normal running program (for winter or summer) will restart so that you
find your house at the required temperature upon your return.
All adjustments requested by the VACATION program must be confirmed by
pressing the OK button. Otherwise, after 3 minutes, the chronothermostat
will return to normal operation in stand-by and the modifications will not be
saved.
Following the path of the button Menu -> WORKING MODE SEt -> select the
element VACATION SEt and then press the button OK.
The VACATION program offers the «Winter 0» or «Summer 1» season of
the running program.
Adjust the start of the vacation «OUT» (leaving the house)
1) The display will show the current month flashing.
2) Use the buttons , to adjust the «OUT» date on which the VACATION
program is to be activated (leaving the house); confirm by pressing the
button OK.
ATTENTION: It is not possible to select a month preceding the current
one. It is possible to adjust up to a maximum of 12 months after the
current one.
40 40 40 40
USER MENU
Set
0 2 4 6 8 10 12 14 16 18
Set
0 2 4 6 8 10 12 14 16 18
1° 2°
20 22
OK
20 22
OK
Chapter 11