Electrical Connections - ABB 2CLA234009N234001 Instrucciones De Instalación, Uso Y Mantenimiento

INSTALACIÓN
6.4

Electrical connections

ATTENTION: Turn off the 230V~ power supply to the devices to be controlled
•
connect the device to be controlled to the terminals:
5 - common (C)
6 - contact normally open (NO)
7 - contact normally closed (NC)
•
an additional temperature sensor can be connected to terminals 13 and 14 (see section 11.9 for adjustment of the
sensor).
note: max. cable length 4 m
•
a telephone programmer (or switch) can be connected to terminals 1 and 2 for remote activation of the
chronothermostat (consult section 11.10 for adjustment of the external contact)
Chapter 6
ABB
19 19