Scope Of Delivery; Special Accessories - Bosch EPS 205 Manual Original

en 46 | EPS 205 | Product description
1
2
Fig. 12: Connection piece
1 O-rings
2 Support rings
6. Replace both the O-rings (Fig. 12, item 1) and both
the support rings (Fig. 12, item 2).
7. Twist and push the connection piece into the body
as far as the second O-ring.
8. Screw on and secure the union nut. Tightening
torque: 10 – 13 Nm.
3.6.10 Inlet connector (CRIN)
The inlet connector (Fig. 13, item 2) included in the
scope of delivery is required for the various test
adapters (special accessories). The test adapters
(Fig. 13, item 3) are used to supply CRIN with
internal connections with test oil by way of the inlet
connector. The return quantity is routed via the
hose 1 680 712 360 from the "Return quantity test
connection" (Fig. 13, item 1) to the "Return quantity
test connection" (Fig. 4, item 3). There are different
types of test adapter.
4
3
Fig. 13: Test adapter with inlet connector
1 Test connection for return quantity
2 Inlet connector
3 Test adapter
4 Mount for CRIN
|
1 689 989 185 2018-03-24
1
2
Preparation of inlet connector
1
458852-02_Pal
Fig. 14: Preparation of inlet connector
1 Inlet connector
2 O-ring 9.5 x 2
¶
Slip the O-ring 9.5 x 2 (Fig. 14, item 2) over the inlet
connector (Fig. 14, item 1).
Fitting test adapter (CRIN)
i
In the EPS 200 system software, the type number of
the injector-specific test adapter can be displayed
with <F10> after selecting a CRIN. Installation of
the TestData software CD ensures that the type
numbers of all injector-specific test adapters
(special accessories) available are displayed.
3
Fig. 15: Fitting injector
1 CRIN
2 Test adapter
3 Inlet connector
2
1
2
Robert Bosch GmbH