Bosch EPS 205 Manual Original página 48

en 48 | EPS 205 | Product description
3.6.15 Adapter cables
Adapter cables 1 684 465 841, 1 684 465 842 (CRI)
The adapter cables are required for actuation of the
CRI via the EPS 205. These adapter cables are primarily
used for Bosch CRI.
1 684 465 841
Fig. 21: Adapter cable 1 684 465 841
1 684 465 842
Fig. 22: Adapter cable 1 684 465 842
Adapter cables 1 684 465 679 (CRI non-Bosch)
The adapter cable is required for actuation of the CRI
non-Bosch via the EPS 205.
1 684 465 679
Fig. 23: Adapter cable 1 684 465 679
Adapter cables 1 684 465 843 (CRIN)
The adapter cable is required for actuation of the CRIN
via the EPS 205.
1 684 465 843
Fig. 24: Adapter cable 1 684 465 843
Adapter cables 1 684 465 669, 1 684 465 671
(CRI Piezo)
The adapter cables are required for actuation of
a CRI Piezo via the EPS 205.
1 684 465 669
Fig. 25: Adapter cable 1 684 465 669
1 684 465 671
Fig. 26: Adapter cable 1 684 465 671
i
Further adapter cables are available as special
accessories for components of various other makes.
|
1 689 989 185 2018-03-24
3.6.16
The return adapter accessory set is needed for CRIN
with split return quantity.
4
458822-76_Ko
458822-77_Ko
Fig. 27:
1. Screw the plug-in nipple (Fig. 27, item 1) with flat
sealing ring (10.2 x 13.4 mm) into the distributor
head (Fig. 27, item 2) and secure.
458881-25_Ko
2. Screw the hose connection (Fig. 27, item 3) with flat
sealing ring (10.2 x 13.4 mm) into the end face of
the distributor head and secure.
3. Attach both hoses (Fig. 27, item 4) to the hose
connections and secure with two hose clamps
(Fig. 27, item 5).
4. Fit the other two hose clamps on the other end of
the hoses.
458881-40_Ko
Connection of return adapter for CRIN with split
return quantity
458881-22_Ko
458881-24_Ko
Fig. 28:
Return adapter accessory set 1 687 016 038
1
3
2
5
5
Fitting return adapter
Connection of return adapter
3
4
Robert Bosch GmbH