Safety Instructions; Hazard Messages; Before Getting Started - Franklin Electric SDCP-SUB0723 Manual Del Usuario

SAFETY INSTRUCTIONS

Hazard Messages

This manual includes safety precautions and other important in-
formation in the following formats:
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, could result in minor or
moderate personal injury.
NOTICE
Indicates a potentially hazardous situation
which, if not avoided could result in damage to
equipment or other property.
IMPORTANT: Identifies information that controls correct assem-
blyand operation of the product.
NOTE: Identifies helpful or clarifying information.
This symbol alerts the user to the presence of danger-
ous voltage inside the product that might cause harm
or electrical shock.
This symbol alerts the user to the presence of hot sur-
faces that might cause fire or personal injury

Before Getting Started

This equipment should be installed and serviced by technically
qualified personnel who are familiar with the correct selection
and use of appropriate tools, equipment, and procedures. Fail-
ure to comply with national and local electrical and plumbing
codes and within Franklin Electric recommendations may result
in electrical shock or fire hazard, unsatisfactory performance, or
equipment failure.
Read and follow instructions carefully to avoid injury and prop-
erty damage. Do not disassemble or repair unit unless de-
scribed in this manual.
Failure to follow installation or operation procedures and all ap-
plicable codes may result in the following hazards:
WARNING
High voltages capable of causing severe
injury or death by electrical shock are
present in this unit.
• To reduce risk of electrical shock, disconnect power
before working on or around the system. More than
one disconnect switch may be required to de-ener-
gize the equipment before servicing.
• Make sure the ground terminal is connected to the
motor, control enclosures, metal plumbing, and other
metal near the motor or cable using wire no smaller
than motor cable wires.
CAUTION
Risk of bodily injury, electric shock,
or property damage.
• This equipment must not be used by children or per-
sons with reduced physical, sensory or mental abil-
ities, or lacking in experience and expertise, unless
supervised or instructed. Children may not use the
equipment, nor may they play with the unit or in the
immediate vicinity.
• Equipment can start automatically. Lockout-Tagout
before servicing equipment.
• This equipment produces high temperatures during
normal operation. Use caution when contacting
surfaces.
• Operation of this equipment requires detailed instal-
lation and operation instructions provided in this
manual for use with this product. Read entire manual
before starting installation and operation. End User
should receive and retain manual for future use
• Keep safety labels clean and in good condition.
SAFETY INSTRUCTIONS
Hazard Messages
5