Unpacking And Inspection; Transportation And Storage; Unpacking - Franklin Electric SDCP-SUB0723 Manual Del Usuario

UNPACKING AND INSPECTION

Transportation and Storage

NOTICE
Risk of damage to VFD or other equipment.
• Do not stack VFD boxes more than three high (Frame 2) or two high (Frame 3) when pal-
leting for storage.
• Do not place heavy items on VFD.
• Do not drop VFD or subject it to hard impact.
• Dispose of VFD properly as industrial equipment waste.
The VFD should be stored in the shipping carton or crate before installation.

Unpacking

CAUTION
Risk of personal injury or damage to VFD or other equipment.
• Use two persons when lifting the VFD. Or, use suitable lifting equipment, in good condi-
tion, rated for at least 5 times the weight of the VFD. Refer to Applications on page 8 for
the VFD weight.
1. Inspect exterior of package for shipping damage. If there is damage, notify the shipping agent and
your sales representative.
2. Make sure the part number and product ratings on the identification label are correct for the
application.
3. Remove drive from the box and check for damage.
4. Make sure the product ratings on the nameplate match the package label..
UNPACKING AND INSPECTION
Transportation and Storage
9