Shirring; Honeycomb Stitch; Maintanance; Cleaning And Removing The Hook - Texi Fox 25 Manual De Usuario

SHIRRING

HONEYCOMB STITCH

With the stitch length ''4",
sew straight stitching;
lines 3/8 apart across the
area to be shirred. Knot
the threads along one
edge, pull the bobbin
threads and distribute
the gathers evenly.
Secure the thread at
the other end. Sew
the honeycomb stitch
between the gathering
stitches. Pull out the
gathering stitches.

MAINTANANCE

CAUTION: Unplug the power supply before making below acitivies.

CLEANING AND REMOVING THE HOOK

1. Raise the needle to its
highest position and open
the shuttle cover. Open
the hinged latch of the
bobbin case and take it
out of the machine.
Machine Setting
D
Wrong side of fabric
2. Open the shuttle race
cover holders.
"
Texi Fox 25
1~ 4
10mm(3/8" )
3. Remove the shuttle
race cover.
EN
S S
83