Ensure that the device
Z
X
is installed in a way that
allows to disconnect it from
the power supply, with a
contact opening distance
that ensures complete
disconnection in category
III overvoltage conditions.
Means for disconnection
must be incorporated in the
fixed wiring in accordance
with the wiring rules.
Only use the temperature
Z
X
probe recommended for
this oven.
The appliance shall not be
Z
X
installed behind a decorative
door in order to avoid
overheating.
Risk of burns!
During use the appliance
Z
X
becomes hot. Care should
be taken to avoid touching
heating elements inside the
oven. Children less than
8 years of age shall be kept
away unless continuously
supervised.
Risk of burns!
The end of the door handle may
be hotter due to hot air being
vented.
Always make sure that the
Z
X
control knobs are in the off
position when the oven is not
in use.
MA 82 M _/F / MA 86 M _/F
WARNING: Ensure that the
appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock.
Do not use harsh abrasive
Z
X
cleaners or sharp metal
scrapers to clean the oven
door glass/ the glass of
hinged lids of the hob
(as appropriate), since they
can scratch the surface,
which may result in shattering
of the glass.
Do not use steam cleaners or
Z
X
direct jets of water.
If the supply cord is
Z
X
damaged, it must be replaced
by the manufacturer, its
service agent or similarly
qualified persons in order to
avoid a hazard.
Proper installation and placement
Keep children away from the device and the
packaging material.
If the oven is to be permanently connected to
the power supply:
Z
X
Ensure that the device is installed only
by the customer service, an electrician
or trained personnel with the appropriate
knowledge/education.
Z
X
Ensure that the device is connected directly
to the mains socket.
Z
X
Ensure that no adapters, no multi-sockets
and no extension cables are used to
connect the device.
Z
X
Ensure that the device is not exposed to
atmospheric agents (rain, sun).
– 5 –
EN