Symbols; Product Description - Roger Technology H70/104AC Instrucciones Y Advertencias Para El Instalador

2

Symbols

The symbols and their meaning in the manual or on the product label are
indicated below.
Generic danger.
Important safety information. Indicates operations and situations in
which the personnel involved must pay close attention.
Dangerous voltage risk.
Indicates operations and situations in which the personnel involved
must pay close attention to dangerous voltages.
Hot surfaces risk.
Indicates danger due to hot surfaces or which anyway have high
temperatures (risk of burns)
Useful information.
Indicates useful information for the installation.
Refer to the Installation and use instructions.
which must be available for future use and must not be damaged in
any way.
Protective earth connection point.
Indicates the admissible temperature range.
Alternating current (AC)
Direct current (DC)
chapter 22.
3

Product description

The H70/104AC control unit is intended to control sliding gate automation
systems and overhead doors with 1 asynchronous single phase 230V~ (or 115
H70/104AC/115 version) ROGER motor.
The H70/105AC control unit is intended to control sliding gate automation
H70/105AC/115 version) motor.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to
improper use or any use other than the intended usage indicated in this manual.
We recommend using only ROGER TECHNOLOGY accessories and control
photocells.
manual of the automation system.
48
F2ES or F2S series