Symbols; Useful Information; Product Description - Roger Technology H70/200AC Instrucciones Y Advertencias Para El Instalador

2

Symbols

The symbols and their meaning in the manual or on the product label are indicated
below.
Generic danger.
Important safety information. Indicates operations and situations in
which the personnel involved must pay close attention.
Dangerous voltage risk.
Indicates operations and situations in which the personnel involved
must pay close attention to dangerous voltages.
Hot surfaces risk.
Indicates danger due to hot surfaces or which anyway have high
temperatures (risk of burns)

Useful information

Indicates useful information for the installation.
Refer to the Installation and use instructions.
Indicates the obligation to refer to the manual or original document,
which must be available for future use and must not be damaged in
any way.
Protective earth connection point.
Indicates the admissible temperature range.
Alternating current (AC)
Direct current (DC)
Symbol for the product disposal according to the WEEE directive, see
chapter 21.
3

Product description

The H70/200AC control unit is intended to control gate automation systems with 1 or 2 asynchronous single phase 230 V
AC ROGER motors.
Use the same type of motor for both gate leaves in automation installations for double leaf swing gates.
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use or
any use other than the intended usage indicated in this manual.
Adjust the opening and closure speed, deceleration and delay settings appropriately for the specific installation, ensuring that
the gate leaves overlap correctly.
For further information, refer to the installation manual of the motor.
48