Selecting Courtesy Light Mode; Restoring Factory Default Values; Hw Version; Year Of Manufacture - Roger Technology H70/104AC Instrucciones Y Advertencias Para El Instalador

Courtesy light. The output COR is managed from the remote control. The light remains lit as long as the
remote control is active. The parameter
Courtesy light ON-OFF (PP). The output COR is managed from the remote control.
The remote control turns the courtesy light on and off. The parameter
FLASHING LIGHT. The FLASHING LIGHT output is managed from the remote control. The light remains lit
as long as the remote control is active. The parameter
FLASHING LIGHT ON-OFF. The FLASHING LIGHT output is managed from the remote control.
The remote control turns the courtesy light on and off. The parameter

Selecting courtesy light mode

Disabled.
ACTIVE. The light remains lit for the entire duration of the manoeuvre.
From 3 to 90 s. The light remains lit for the time period set after the manoeuvre is completed.
From 2 to 8 minutes. The light remains lit for the time period set after the manoeuvre is completed.
ignored.
N.B.

HW version.

Year of manufacture.

Week of manufacture.

Serial number.

FW version.

View manoeuvre counter

The number consists of the values of the parameters from
N.B.
Manoeuvres performed.
Example x100 = 12.300 manoeuvres.

View manoeuvre hour counter

The number consists of the values of the parameters from
N.B.
is ignored.
is ignored.
to multiplied by 100.
to .
is ignored.
is ignored.
to .
67