Clearing The Password; Activating The Parental Control; Setting The Voluntary Movie Rating System (Mpaa); Setting The Tv Ratings - Pioneer PDP-6010FD Manual De Instrucciones

Tuner Setup
8
Enter the same password that you have entered in
step 7.
• A confirmation screen appears.
9
Press A.
10
Press HOME MENU to exit the menu.
Note
• Take note of the newly set password and keep it handy.

Clearing the password

Use the following procedure to clear the password.
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Parental Control" ( /
4
Select "Password" ( /
5
Select "Clear Password" ( /
Parental Control Password
Change Password
Password
Clear Password
6
Enter the current four-digit password, using buttons 0
to 9.
• A confirmation screen appears.
7
Press A.
8
Press HOME MENU to exit the menu.
Note
• The above procedure will reset the password to the factory
default (1234).

Activating the Parental Control

1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Parental Control" ( /
4
Select "Status" ( / then ENTER).
5
Select "On" ( / then ENTER).
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
6
Press HOME MENU to exit the menu.
We suggest you write down your password so you don't forget it.
PDP-6010FD/PDP-5010FD
Your password No.:
then ENTER).
then ENTER).
then ENTER).
then ENTER).
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit
then ENTER).
then ENTER).
Setting the voluntary movie rating system
(MPAA)
1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Parental Control" ( /
4
Select "MPAA Ratings" ( /
5
Select the desired rating and change the setting ( /
then ENTER).
Parental Control MPAA Ratings
MPAA Ratings N/A
G
PG
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
• Each time you press ENTER, the setting is switched.
• A lock icon appears beside the blocked rating.
• All the ratings have been unblocked before shipment.
6
Press HOME MENU to exit the menu.
Note
• Blocking a rating causes more severe ratings to be
automatically blocked as well. Likewise, unblocking a rating
causes less severe ratings to be automatically unblocked.

Setting the TV ratings

1
Press HOME MENU.
2
Select "Tuner Setup" ( /
3
Select "Parental Control" ( /
4
Select "TV Ratings" ( /
5
Select the desired rating and change the setting ( /
then ENTER).
Parental Control TV Ratings
TV-None
TV-Y TV-Y
TV Ratings
TV-Y7
TV-G
TV-PG
• The password entry screen appears. Enter your four-digit
password using buttons 0 to 9.
• Each time you press ENTER, the setting is switched.
• A lock icon appears beside the blocked rating.
• All the ratings have been unblocked before shipment.
If you forget the password
When the message "Enter your Password" is displayed in step 6
under "Clearing the password", press the ENTER button on the
remote control unit and hold it down for three seconds or longer.
The password reverts to "1234".
then ENTER).
then ENTER).
then ENTER).
xxxxxxxxxxxxxxxxxxxxx
Blocked MPAA Ratings
xxxxxxxxxxxxxxxxxxxxx
N/A, G, PG,PG-13, R, NC-17
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit
then ENTER).
then ENTER).
then ENTER).
xxxxxxxxxxxxxxxxxxxxx
Blocked TV Ratings
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu Exit
09
45
En