Changing The Headlight Bulbs; Changing The Headlight Bulbs (Low/High Beam); Changing The Front Direction Indicator Bulbs - APRILIA SR 50 Manual Del Usuario

2
CHANGING THE HEADLIGHT
BULBS
Carefully read p. 71 (BULBS).
The headlight contains:
- two low beam bulbs.
To change the bulbs, proceed as follows:
◆ Remove the front inner shield, see p. 59
(REMOVING THE FRONT INNER SHIELD).
◆ Move the protection element (1) with your
hands.
◆ Rotate the check tang (2) positioned
behind the bulb socket anticlockwise.
◆ Extract the bulb and replace it with a new
one of the same type.
use and maintenance SR 50
72
All manuals and user guides at all-guides.com
3
1
CHANGING THE HEADLIGHT
BULBS (low/high beam)
Carefully read p. 71 (BULBS).
The headlight contains:
- one low/high beam bulb (5).
LOW / HIGH BEAM BULB
◆ Remove the front inner shield, see p. 59
(REMOVING THE FRONT INNER SHIELD).
◆ Move the protection element (3) with your
hands.
◆ Rotate the bulb socket (4) anticlockwise
and extract it.
◆ Press the bulb (5) slightly and rotate it
anticlockwise.
◆ Extract the bulb (5) from its seat.
◆ Correctly install a new bulb of the same
type.
5
4
CHANGING THE FRONT
DIRECTION INDICATOR
BULBS
Carefully read p. 71 (BULBS).
To change the bulbs:
NOTE
one direction indicator only, but is valid for
both.
◆ Unscrew and remove the screw (1).
Proceed with care.
Do not damage the tangs and/or their seats.
5 4
3 1 2
The following information refers to
CAUTION