Rear Wheel - APRILIA SR 50 Manual Del Usuario

4
2
5

REAR WHEEL

DISASSEMBLY
Carefully read p. 44 (MAINTENANCE).
◆ Remove the silencer, see p. 63 (REMOVING
THE EXHAUST SILENCER).
◆ Remove the cover (1).
◆ Pull the rear brake lever (2) completely,
then put a small piece of cardboard (3) on
the grip and keep the rear brake lever
pulled by holding it against the grip by
means of a plastic band (4).
◆ Unscrew and remove the three screws
(5) and the washers.
use and maintenance SR 50
52
All manuals and user guides at all-guides.com
3
Screws (5) driving torque: :
50 Nm (5.0 kgm).
◆ Remove the plastic band (4) and take the
piece of cardboard (3).
◆ Release the rear brake lever.
◆ Withdraw the wheel.
NOTE
Use aprilia Genuine Spare Parts
only.
◆ After reassembly, make sure that the
following components are not dirty:
- tyre;
- wheel;
- brake discs.
6
WARNING
After reassembly, pull the rear brake lever
repeatedly and check the correct functioning
of the braking system. Check the wheel
centering.
Have the driving torques, centering and
balancing of the wheel checked by your
aprilia Official Dealer, in order to avoid
accidents that may be harmful for you and/
or other people.