Installing The Rear Mudguard Extension; Removing The Rear-View Mirrors - APRILIA SR 50 Manual Del Usuario

3
4
INSTALLING THE REAR
MUDGUARD EXTENSION
Carefully read p. 44 (MAINTENANCE).
◆ Raise the saddle, see p. 24 (UNLOCKING
/ LOCKING THE SADDLE).
◆ Take the rear mudguard extension (1) out
of the crash helmet/glove compartment
together with the screws and relevant nuts
provided for the fastening.
◆ Correctly insert the clip (2) in the
appropriate seat (3).
◆ Position the rear mudguard extension (1)
inside the number plate holder support
(4).
◆ Tighten the screw (5).
◆ Insert the three screws (6) and tighten
the relevant nuts (7).
use and maintenance SR 50
58
All manuals and user guides at all-guides.com
2
5
7
1
◆ In the countries where required: working
from the inner side of the number plate
holder, insert the bulb socket (8).
◆ Make sure that the rear mudguard
extension (1) is positioned correctly.
6
1
8
9
11
12
10
REMOVING THE REAR-VIEW
MIRRORS
Carefully read p. 44 (MAINTENANCE).
The following information refers to one rear-
view mirror only, but is valid for both.
◆ Position the vehicle on the centre stand,
see p. 43 (POSITIONING THE VEHICLE
ON THE STAND).
NOTE
Group the components of the left
and right rear-view mirrors separately.
◆ Remove the cover (9).
CAUTION
Hold the rear-view mirror (10), to prevent
it from accidentally falling down.
◆ Unscrew the screw (11).
◆ Remove the rear-view mirror (10).
◆ Remove the gasket (12).