Changing The Dashboard Bulbs - APRILIA SR 50 Manual Del Usuario

CHANGING THE
DASHBOARD BULBS
Carefully read p. 71 (BULBS).
NOTE
Before changing a bulb, check the
fuses, see p. 70 (CHANGING THE FUSES).
The dashboard contains:
- the warning light bulbs;
- the dashboard lighting bulbs.
To change the bulbs:
Carefully read p. 71 (BULBS).
use and maintenance SR 50
74
All manuals and user guides at all-guides.com
WARNING LIGHT BULBS
NOTE
Extract the bulb sockets one by
one, in such a way as to avoid positioning
them incorrectly during the reassembly.
◆ Extract the relative bulb socket:
Pos. Warning light
10 Direction indicators (
11 Mixer oil reserve (
12 Low beam ( )
12 High beam ( )
(for the countries
where required)
13 Low fuel ( )
14 Injection check
◆ Extract the bulb and replace it with one of
the same type.
16
10
DASHBOARD LIGHTING BULBS
NOTE
Extract the bulb sockets one by
one, in such a way as to avoid positioning
them incorrectly during the reassembly.
◆ Extract the bulb socket of the dashboard
part in which there has been a light
Colour
decrease:
) green
Pos. Lit part
) red
15 Upper right part
green
16 Upper left part
blue
17 Lower right part
◆ Extract the bulb and replace it with one of
amber
the same type.
red
17
14
11 12 13 15