Bluetooth® Communication - Blatchford LINX22L1S Manual Del Técnico Ortoprotésico

9.1.2 Making a Bluetooth® Connection: Connect to the Device
Switch the Battery On/Off switch to ON [I]
and wait until the reset sequence has been
completed successfully.
Press and hold the [+] button on the limb until
the LED is purple.
Press the [Find New Limb] button.
Select the device from the list of limbs found
(pick the entry with the strongest signal if
more than one limb is found).
When connected press and hold the [+] button
on the limb and wait for the Hub screen to be
displayed, or for the Program
screen to be displayed if this
is the first time the App has
been used.
Bluetooth® Communication
(Press and hold [+] for ½ second )
LED
Purple
Blue
What to do if you cannot connect:
• Check device is switched on.
• Check battery level.
• Ensure Bluetooth® is enabled on limb
(purple LED).
• Check Bluetooth® is enabled on
programming device.
• Move closer to limb.
• Wrong limb selected: select another limb
from list of limbs.
21
Status
Bluetooth® module enabled
Connected to App Device
938353V2APK1/1-0321