TOHATSU MFS 25B Manual Del Propietário página 63

62
INSPECTION AND MAINTENANCE
2. Spark gap (0.8–0.9 mm, 0.031–0.035 in)
ENON00028-0
Note
Spark plug torque:
18.0 Nm (13.3 ft-lb) [1.84 kgf-m]
If a torque-wrench is not available when you
are fitting a spark plug, a good estimate of
the correct torque is 1/4 to 1/2 a turn past
finger-tight. Have the spark plug adjusted to
the correct torque as soon as possible with
a torque-wrench.
ENOM00088-0
Replacing the anode
A sacrificial anode protects the outboard
motor from galvanic corrosion. Anode is
located on the gear case and the cylinder.
When the anode is eroded more than 2/3,
replace it.
ENON00029-0
Notes
Never grease or paint the anode.
At each inspection re-tighten the anode
attaching bolt. As it is likely to be sub-
jected to electrolytic corrosion.
1
1. Anode (Trim tab)
All manuals and user guides at all-guides.com
1. Anode
1. Anode
1. Anode (installed on the back of cap)
ENOF00086-0
1
ENOF00087-0
1
ENOF00088-0
1
ENOF00089-0