Understanding The Control Board; Control Description - Pit Boss PRO Serie Manual Del Usuario

UNDERSTANDING THE CONTROL BOARD

This P.I.D. (proportional-integral-derivative) digital Control Board is very much the
same as the controls on your kitchen oven. The main advantages are the ability to
automatically compensate for the different ambient conditions and fuel types.
IMPORTANT: The temperature inside of any grill will vary
greatly from location to location. Even instruments calibrated
together may not agree with each other.
CONTROL DESCRIPTION
Press this button to Power On the unit. This will begin
the automatic start-up cycle. Press and hold this button
for three seconds to Power-down the unit, activating
the automatic cool-down cycle. The button will light
up solid white when connected to a power source and
when the unit is on.
The Smoke iT® icon indicates a connectivity with Wi-
Fi. When searching for a connection by Wi-Fi or via
Bluetooth®, the Smoke iT® icon will blink. Once a Wi-Fi
connection has been established, the Smoke iT® icon
will stay solid. When connected, get live updates about
the actual and set temperatures of the grill, cooking
time, and meat probe temperatures. It also allows you
to adjust the settings of your Control Board.
Quick push of this button to activate the Temperature
Units Switch, changing the temperature readout.
Change between Celsius (ºC) and Fahrenheit (ºF), as
preferred. Default is set to Fahrenheit.
This button has two functions: Meat Probe Control (MPC) and Prime Button.
1. The quick push of this button activates the Programmable Meat Probe - which is the first Meat Probe
plug-in port (MPC). Use the Controller Knob to set the Programmable Meat Probe temperature.
Press the Controller Knob again to confirm and exit the Programmable Meat Probe settings.
2. Press and hold this button for three seconds to activate a manual continuous feeding of pellets to
the fire pot. Releasing the button will stop the manual feeding of pellets. This can be used to add
more fuel to the fire before opening the cabinet door, resulting in a quick heat recovery. It can also
be used while smoking, to increase the intensity of clean smoke flavor. This feature was requested
MPC
from competition cookers.
The Controller Knob is used to increase, decrease, and select a setting value. Push and release the
Controller Knob to activate, then rotate the Controller Knob to select the time, temperature, or step in
an active settings menu. Push the Controller Knob to confirm the chosen value.
MPC
MPC
15