Mounting The Support Legs To Main Cabinet; Mounting The Support Panels - Pit Boss PRO Serie Manual Del Usuario

2. MOUNTING THE SUPPORT LEGS TO MAIN CABINET

Parts Required:
1 x Left Support Leg - Front (#12)
1 x Left Support Leg - Back (#13)
1 x Right Support Leg - Front (#14)
1 x Right Support Leg - Back (#15)
2 x Screw (#C)
16 x Nut (#E)
1 x Wrench (#F)
Installation:
• Prepare the four support legs for installation, arranging the labeled
legs as shown in illustration 2A.
• Mount a Support Leg by aligning onto the protruding screws of the
Main Cabinet bottom side, then secure with four nuts using wrench.
Repeat installation for the other three Support Legs. Note 2B.
IMPORTANT: The four support legs must be arranged correctly to be
able to properly install the support panels and support bar in a later
assembly step.
• Fasten the Front Panels to each Front Support Leg using one screw in
each panel. Note 2C.

3. MOUNTING THE SUPPORT PANELS

Parts Required:
2 x Support Panel (#18)
8 x Screw (#C)
Installation:
• Install one Support Panel to the side of the unit between a Front and
Back Support Leg. Secure using two screws on each side. Ensure the
flat side of the Support Panel is facing outwards. Repeat the same
installation to mount the other Support Panel. Note illustration for
support panel arrangement.
8
2A
13
12 14
2B
14
E
12
E
13
E
2C
C
C
3
18
C
15
E
15
C
18