Mounting The Drive Tube - Stihl FS 160 Manual De Instrucciones

4 Mounting the Drive Tube

13 Shredder blade 270-2
(270 mm dia.)
14 Scratcher tooth circular saw blade 200
(200 mm dia.)
15 Chisel tooth circular saw blade 200-22
(4119), chisel tooth circular saw blade 200-22
HP (4000)
16 Scratcher tooth circular saw blade 225
(225 mm dia.)
17 Chisel tooth circular saw blade 225
(225 mm dia.)
18 Carbide tipped circular saw blade 225
(225 mm dia.)
WARNING
Non-metal grass cutting blades, brush knives,
shredder blades and circular saw blades are not
approved.
3.3 Deflectors, Limit Stops
19 Deflector for mowing heads
20 Deflector with
21 skirt and blade, for mowing heads
22 Deflector without skirt and blade, for metal
cutting attachments, items 8 to 12
23 Deflector for shredder blade
24 Limit stop for circular saw blades,
items 14 and 15
25 Limit stop for circular saw blades,
items 16 and 18
3.4 Harness
26 Full harness must be used
27 Full "deluxe" harness must be used
1)
Approved for FS 280, 290 only
0458-323-8721-D
4 Mounting the Drive Tube
► Pull the protective cap off the drive tube (1).
► Slide the two throttle cable retainers (2) and
the clamp (3) for the harness onto the drive
tibe in the order shown.
English
63